These necklaces are stylish, durable and suitable for almost any type of clothing. Of course, you can always buy shark necklaces from many websites and stores. But you can also make it yourself. All it needs is some basic consumables. A little bit of time. And knowledge about how to make them. If this sounds like something you are interested in. You may wish to take a look at the following tutorial. We will guide you through the process of making your own shark necklace.
Choose shark teeth for the necklace
What are the materials for a shark necklace?
Before you start. It is important to pay attention. There is no specific way to create a shark tooth necklace. In fact, once you have the experience of making them. You can start experimenting with various materials and methods. The method we will introduce here is one of the most basic ways to make a shark necklace. To create one, you need to choose the following materials:
How to make a shark tooth necklace with wire?
The following is a detailed explanation of how to make a shark tooth necklace from a wire. You may wish to take a look. This may give you some inspiration when making a shark necklace.
Step 1: Wrap the wire around the teeth.
And to form a loop or loop of the rope. Place the tooth face down on a flat surface. And cut the line about 12 inches long.
Step 2: Form a small circle at one end of the wire.
Keep the collar above the center of the tooth. Leave approximately 1/4 inch of space between the teeth and the collar. The wires are then routed around the side of the “glue” at an angle of approximately 45 degrees. Or the top of the tooth and return to the ring.
Step 3: Attach the wires to the teeth.
Take it around the top of the line. Then wrap around the other side of the “glue” or the top of the tooth. Be sure to pull the wires on both sides as tight as possible. The remaining wires are then wound around the loop several times. When you reach the bottom of the loop. Please cut off the extra wires.
Step 4: Slide the wire-wrapped shark’s tooth on to the cord.
If you use any beads to decorate the shark tooth necklace. Also slide it to the line. If you don’t want the beads to stick to the shark teeth. Please make a summary on the rope. And park it where you want it. You may need to place knots on either side of the beads to hold them in place.
Step 5: Bind the end of the wire.
At the end of each rope. Hit a small hand knot and then clamp the rope within 1/4 of the knot. This will add brilliance to the necklace. Then, fix the ends together. Make a knot at the end of the necklace. Keep the knots quite loose. And make it as close as possible to the end of the rope. Tighten the knot.